Your domain registration is pending. Check back in an hour

Updates

security door lock repair or replace. Marks mortise locks, having trouble with your locks not working properly! wont open or just need strike plate adjustment, to were the door will close and lock. We also rekey to your existing key or new key.

Call now

Re-key Schlage Locks on West 3rd Little Rock, 72201. Need your locks change or rekey. Call for appointment or same day service.

Call now

Harley-Davidson 2015 Street glide.Made new existing keys on site from scratch for customer that lost their keys. Tubular Ace barrel key.

Call now

Re-key Kwikset Locks Knobs & Deadbolts Catlett Lane 72211 Little Rock, it's in the area of Wellington Village. We re-key locks to new keys on site right from the work vehicle. We do not leave the location of the property, call to have your locks re-keyed same day service our appointment.

Call now

Call Joe's Lock and Key for your Locksmith needs. We can rekey your locks Home or Business to a new key so your old key wont work. It saves you money from buying new locks and it keeps unwanted people that may have a existing key out.

Call now

Services

Auto Locksmith

  • VATS KEY REPLACEMENT

    What is VATS? (Vehicle Anti Theft System) was introduced by GM on the 1986 Corvette because the Corvette had become the number one target of car thieves Corvette thefts dropped so impressively after VATS was implemented that Gm expanded the system in 1988 to the Camaro, Firebird, and Cadillac Seville. Before long, VATS was standard equipment on all Cadillac vehicles and on many other Chevrolet, Pontiac, Buick, and Oldsmobile vehicles. As the system was added to more vehicles, GM began using the terms "PASSkey-1" and "PASSkey-2" as more descriptive names for the system. From the locksmith's point of view, there is no functional difference between VATS and PASSkey-1 or Passkey-2, and most technicians still refer to the system simply as VATS
  • Transponder Key

    Many modern now day cars now use transponder keys to help prevent car theft. These keys, also known as a “chip keys”, have electronic chip inside the plastic portion of the key. The electronic chip in the key requires no battery. When you turn the key, in the ignition, the car’s transponder chip sends a signal to the key. It responds by sending a coded signal back to the vehicle’s computer. Typically if these keys get lost or damaged, you must get a new one from the dealer or a locksmith. We can cut and program all known transponder keys that are in use.
  • What is a Transponder key?

    Simply put, these (Keys) have a rf transmitter inside of them. A device near the ignition switch of the vehicle has a receiver. The (Key) transmits an extremely low-level signal that the vehicle can detect only when the (key) is in the switch.
  • Car Key Programming

    Electronic keys were first introduced in the 1990s as an extra means of convenience and security for vehicles. Also known as chip keys and transponder keys, these must be programmed to an individual vehicle before they can be used to start the car's ignition.....only the transponder key will activate your car, and the key can only be programmed from the car it self. We make lost car key from scratch on site and programmed to your vehicle.
  • Car key replacement

    Lost car keys? We have in stock or can purchase key blanks for any make or model of car available on the market today. Pricing Will Vary Based On Make, Model and Year Of Your Vehicle. We can program Transponder keys, Key fobs, Keyless entry devices. We cut the keys are duplicate on site.

Car Lockout

  • Car Lockout, Truck, Semi-Trailer Truck, Big Rig, RV

    We have our own unique way of unlocking vehicles, ( Same Price For All Makes & Models ) if you haven't used our service you are in for a surprise. Air wedge and long reach tools are a thing of the past we only use as a last resort . We don't own your vehicle but we treat it like it's ours. So call us when you get locked out, and we will come and unlock it, Our response time is depending on the location and traffic.

Residential Locksmith

  • Home Lockout

    Call Us When Your Locked out, we pick the locks with professional skill, we believe as a locksmith picking locks is a skill not learned overnight but however, and as a professional sometimes and only as a last resort we may use a drill to open your existing lock. This is the ethics of a legit locksmith.
  • Rekey Locks

    Rekeying a lock is changing the internal parts in the lock so that it requires a new key to open it. This is needed when you lose a key and you are afraid that someone may gain unauthorized access to your home. Other times you might want to rekey is when going through a divorce, or if a family member has lost, loaned keys out, or if you are moving into a new home. Many problems can be corrected without replacing the lock. Locks are usually lubricated when rekeyed, which can make them operate much more smoothly. Then again, problems may be discovered that indicate that a lock should be replaced. We Service Kwikset, Weiser, Schlage, Best IC cores, Falcon, Yale, Kwikset Titan, Mark's, Emtek, Baldwin and so many more, give us a call we do free estimates.
  • Lock Installation

    A drill with a hole saw is used to bore holes into the door so that the deadbolt lock can be properly installed. ..This method is the same for both thumbturn deadbolts and double cylinder deadbolts, and the same for door knob. The most important aspect of this process is making sure that the hole is properly drilled into the door when the are Locks Installed. A thumb turn deadbolt allows anyone inside the building to retract or extend the bolt of the lock without using the key. The cylinder requires a key. With double-sided deadbolt, a key is required to both lock and unlock the deadbolt no matter what side of the door you are on. A deadbolt is different than a standard keyed knob.
  • Lock Repair

    If your door locks just quit working we can help. If you have broken a key in a lock, we can get it out and make a new one.

Commercial Locksmith

  • Rekey Lock

    If you have missing keys to your facility, are replacing a employee, we recommend that you have your locks rekeyed. This will prevent easy access to you business by those who shouldn’t be there. Of course, if you are using the newer high security electronic locking systems, reprogramming is all that is needed (an electronic re-key, so to speak).Many problems can be corrected without replacing the lock. Locks are usually lubricated when rekeyed, which can make them operate much more smoothly. Then again, problems may be discovered that indicate that a lock should be replaced. We Service Kwikset, Weiser, Schlage, Best IC cores, Falcon, Yale, Kwikset Titan, Mark's, Emtek, Baldwin, Sergeant, Panic Bar, Magnetic Lock, and so many more, give us a call we do free estimates.

Emergency Lockout

  • Home Lockout

    We understand the stress that is instantly created from being Locked out of your Home, Car, Business. That is why we are do Emergency Lockout service and have the expertise in servicing all kinds of Residential Locks Commercial Locks Automotive Locks. We won't to earn your business and be a company that you can feel good about recommending to your friends and neighbors.

Key Codes

  • Key code( 2 Kinds) Blind codes and Bitting codes

    Blind codes, These are codes that require a chart or computer program to translate the blind code to a bitting code, which is used to create the actual key. Most key codes are blind codes, and publication of code books or software are restricted to licensed locksmiths in most jurisdictions for security reasons[citation needed]. Some locksmiths also create their own blind coding systems for identifying key systems they installed, or for customer identification and authorization in high security systems. Example: 23N7 (General Motors) or X2100 (Nissan) are examples of blind codes used for automotive ignition keys. Many computer and manually generated master keying charts also utilize blind codes for identifying individual change keys and masters within the system.
  • Bitting codes

    Bitting codes, The bitting code is the translated blind code which the locksmith actually uses to cut each blank key. Example: padlock blind code W123 translates to bitting code 25313, to which the locksmith would cut the key with his code machine by setting it to 25313. The bitting code is used in conjunction with a key's Depth and Spacing Number to completely determine all relevant information regarding the key's geometry.[1] Each number in the bitting code corresponds to a cut on the key blade. For example, a bitting code of 11111 with Depth and Spacing Number 46 specifies a Kwikset key with five shallow cuts. Conversely, a bitting code of 77777 and Depth with Spacing Number 46 specifies a Kwikset key with five deep cuts. Experienced locksmiths might be able to figure out a bitting code from looking at a picture of a key.

Motorcycle Keys and Recreational Vehicle Keys

  • Harley-Davidson, Honda, Kawasaki, Suzuki, Yamaha

    We replace lost or broken keys on site, and can duplicate your existing key as well. Harley-Davidson, Honda, Kawasaki, Suzuki, Yamaha

Testimonials

3 weeks ago
This man is freaking amazing! He literally saved our two week motorcycle trip to upstate New York! He came out on a Saturday, made the key to the motorcycle and unlocked it all within about five minutes. And it didn’t cost me an arm and a leg either! I highly recommend him and his services. Very respectful, affordable, and amazing! Just FYI, we were told by every other locksmith we called that they could not unlock a bolt lock and the only way we could do it was to order a new key from Harley Davidson. This was a 2015 Street Glide. Joe is AWESOME!!!!
- Veritas A
a month ago
I have used many of Lock Smith's in central Arkansas, both for work and personal needs. Joe's Lock and Key had great pricing and outstanding reviews. Google backs him for his service and so I decided to give him a try. His service was outstanding and adding that his pricing is so great, I felt comfortable working with him. He has earned my trust and my continued business, both personally and at work. Hire Joe's Lock and Key, you will be glad you did!
- Blake J
2 months ago
I had lost the key to my Suzuki four wheeler, so I had called other locksmiths but their prices were a little more than I wanted to spend. Joe was able to help me out by meeting me super close to my house and was able to get me a key made on the spot at a very reasonable price! Very respectable gentleman and does good work. Definitely recommend.
- Drew W

LOCKSMITH

Why choose us? We are an independent mobile locksmith company we bring the shop to you. We service all of Little Rock and surrounding Cities and areas. Available for emergency services with affordable pricing, appointments available on Auto,Home,Commercial Lockouts along with On site key replacement for your vehicles Key extraction, transponder chip keys, ignition removal, and Motorcycle key replacement and when it comes to Residential or Commercial Lock change or lock replacement Rekeying your locks would be our first option. We believe that efficiency honesty and quality service are the components of every job we are hired to do and many more. No matter whether you are a home or business owner, we can offer what you need.

Contact Us

Contact

Call now
  • (501) 297-8336

Business Hours

Mon:8:00 AM – 10:00 PM
Tue:8:00 AM – 10:00 PM
Wed:8:00 AM – 10:00 PM
Thu:8:00 AM – 10:00 PM
Fri:8:00 AM – 10:00 PM
Sat:8:00 AM – 10:00 PM
Sun:8:00 AM – 10:00 PM
Contact Us
Message sent. We'll get back to you soon.